Split type UC-H-OMS-560 UC-H-OMS-520 2200kg under cabin load measuring control system Split type load weighing device: OMS-520-UC-H
Diemsion:
methods like rope hitch installation, under car platform installation, crossbeam installation, clamping on traction rope installation in order to offer a safe and comfortable elevator running status.
Universal device for working with different load cells:
Mounting under the elevator cabin floor(floor center):OMS-520-UC-H
The load weighing control system UC-H-OMS-520 is particularly mounted under the elevator cabin floor(center), and under cab sensors are ideal for new installations. They easily mount under the cab and are extremely accurate. They are self-calibrating and do not require test weights,and the standard set usually consist of 1 floor sensor UC-H and 1 weighing unit control OMS-560.
A solution providing very precise load weighing way, thanks for this unique feature that setting is completed easily and with few minutes.
PS: Under cab sensors are not recommended for modernization.
Features:
The load weighing control system UC-H-OMS-520 is particularly mounted under the elevator cabin floor(center), and under cab sensors are ideal for new installations. They easily mount under the cab and are extremely accurate. They are self-calibrating and do not require test weights,and the standard set usually consist of 1 floor sensor UC-H and 1 weighing unit control OMS-560.
A solution providing very precise load weighing way, thanks for this unique feature that setting is completed easily and with few minutes.
PS: Under cab sensors are not recommended for modernization.
Features:
- Load cell specially designed for the Installation under cabin (placed in the center)
- Equipped with silent-block pad to avoid the transfer of vibrations.
- Menu-guided operation
- 4 relays output overload,full,half empty load
- DIN Rail or Surface mounting by screws
- IP-65 rated plastic box.
- Integrated software to correct weight increases due to compensating chain.
- Display load as well as percentage
- Protecting important data from being disturbed by password
- Automatic correction of zero drift, makes the equipment in optimum stage
- Self-learning function, regulating high floor additional weight error
- Control equipment swap entirely,self-diagnosis and alarming
- Self-learning operating conducted by any fixed load
- Floor compensation
- analog outtput :voltage analog or current analog output
Model: | OMS-520 | ||
Operation Voltage | AC/DC16-48V | Sensor operation voltage | DC5V |
Nominal power | 4W | Signal Hold Voltage | AC/DC12-45V |
Input Channel (Load Cell ) | 2 | Measuring precision | 0.1% |
Relay Number | 4(overload,full,half empty load) | Operation temperature | -45degree-+85degree |
Contact Load | 8A250VAC,5A 250VAC,5A 30VDC | Size | 90x84x58mm |
Display Type | 4 digits 0.56 inch LED | Weight | 265g |
Display mode | Weight/percentage | Shell material | ABS |
Floor compensation | Yes | Voltage analog output | 0-10V |
Model: | UC-H | ||
Rated Load | 1200kg/PC | Output Resistance | 1000M+/-2 ohm |
Rated Output | 2.0+-0.02%mv/v | Safe Overload | 150% F.S. |
Total error | +/-0.5% F.S | Ultimate Overload | 200% F.S. |
Repeatability | +/-0.5% F.S. | Construction | Aerometal |
Creep 30min | +/-0.05% F.S/30min | Protection Class | IP68 |
Zero Balance | +/-1% F.S. | Insulation impedance | ≥5000Ω |
T C SPAN | +/-0.02% F.S./10 degree Celsius | Cable length | 8(black) |
Operation temperature range | -30 to 70 degree Celsius | Connection type | 4-bank wire |
Input Resistance | 1030+/-10 ohm |
SUMMIT Elevator Load Weighing Control device system could provide versatile installation
methods like rope hitch installation, under car platform installation, crossbeam installation, clamping on traction rope installation in order to offer a safe and comfortable elevator running status.
Universal device for working with different load cells:
- Under cabin floors:UC-AP-OMS-560
- Clamping on wire rope:RH-SM-OMS-560
- Machine bed frane:RHP-X-OMS-560
- Between the wire rope hitch plate:RHP-E-OMS-560